To measure the static electricity

To contact us:
Boussey Control: Tél : +32 (0) 55 61 21 13 Fax : +32 (0) 55 61 21 01 Mail:

715 and EX 715 static Meters

Technical sheet

Model 715

The 715 Static Meter has been developed to enable industrial engineers to investigate static electricity problems. Its accuracy, stability and ease of use make it the leading instrument in its class.

Benefits and Advantages

• The 715 measures static electricity on the surface of a material, at a distance of 100mm.
• The meter can show where and how the static is generated, its magnitude and its polarity. This gives the engineer a scientific basis for problem analysis.
• The 715 monitors the effectiveness of the action taken to solve the problem. If the solution involves static control equipment, the 715 shows its most effective position.
• The 715 allows the engineer to set standards to avoid future problems. These can range from an acceptable level of charge in materials, to charge levels in products being produced by the process.
• The 715 has two ranges selected by a slide switch on the side of the case. The high range measures up to 200kV with a resolution of 100V. The low range measures up to 20kV with a resolution of 10V.
• There is a “hold” facility to freeze the reading on the display.

electricite statique

ATEX EX715 Static meter

It is the same working as the classic 715 but it works in hazardous areas.
The EX715 Static Meter has been developed to investigate industrial static electricity problems and has been certified for use in hazardous areas.

electricite statique

Nous contacter:
Boussey Control: Tél : +32 (0) 55 61 21 13 Fax : +32 (0) 55 61 21 01 Mail: