The 1250 air bar uses low pressure compressed air to extend the effective static electricity neutralization range by more than 500 mm.
Typical applications for the 1250 air bar are to prevent film adhesion on the rollers of packaging machines, keep sensors clean and free of static electricity, neutralize moldings on conveyors, and much more.
It is important to clean static control equipment to maintain its efficiency. This applies to all static neutralisation and generation electrodes – Bars, Blowers, Guns and Airknives. Regular cleaning will also help to increase working life and improve overall performance.
The antistatic cleaning kit is designed to keep your static control equipment performing to the highest level. It consists of a brush and special cleaning fluid.
Static control products become dirty for three reasons:
Some plastics applications produce gases which can cover the electrode with a conductive coating. Contamination reduces performance by diverting energy away from the emitter pins – the dirtier the ioniser, the less efficient it is. In some cases the contamination may overload the system, causing it to shut down.
The 4510 ionized air jet produces a fast, silent and flat ionized air jet for static neutralization and efficient cleaning.
The 4510 ionized air jets are used in many applications, including neutralizing long-distance static electricity, removing dust, cleaning and separating sheets.
Compact ionized air fan fitted with a power supply unit and integrated controls.
It neutralizes static electricity and ESD by blowing ionized air.
Unit composed of a fan and an ion emitter for a stream of ionized air.
The air from the fan propellers drives the ionized air towards the object to be neutralized.
Long distance antistatic blower used to neutralize static charge on molded parts, reels, wrapping machines and other large applications.
The antistatic ramp contains two 1250 bars which generate a large amount of ions.
The ions are propelled by the wind tunnel towards the object to be neutralized.
The ionizing point IONSTORM 3810 is used to neutralize cabinet ducts and other enclosed spaces.
The ionizing point Ionstorm uses the same technology as the 3850 bar, its small footprint allows it reduced access and easy use.
The 3700 regulator (which supplies the ionizing point) makes it possible to adapt the settings according to the applications. Set to low frequencies for distances up to 1 meter and to faster frequencies for closer distances.
The conventional IONSTORM bar is the most powerful on the market !!!
Advanced pulsed DC ionization technology for neutralizing static electricity over long distances without pneumatic assistance (up to 1000mm).
The IONSTORM HP bar works in the same way but is optimized for distances between 200 and 750 mm.
In this range, choose the IONSTORM HP and beyond choose the conventional IONSTORM.
Advanced long-distance static electricity control device. Use of intelligent ionization technology to provide unrivaled performance in a secure and reliable way at distances up to 1.50m.
A microcomputer controls and regulates two compact high voltage sources (> 30kV) so as to ensure safe and shock-free operation.
The 3024F model is used for high speed (1000m/min) and short range neutralizations (ideal between 40 and 100mm)
The 3024L model is used for distance neutralizations from 100 to 600mm. It is a long distance neutralizer but we talk about it in this section because it is a derivative of the 3024F model.
Besides this, these two models are identical. They have the advantages of having a built-in power unit for ease of use and a smaller footprint. You will find this page in the short distance (3024F) and long distance (3024L) neutralizers.
The NEOS range of static eliminators is a major advance in industrial static control technology. NEOS intelligence monitors and reacts to the static charge by emitting the quantity and balance of ions to neutralise it. The combination of NEOS intelligence with intense ion generation creates static eliminators for the most demanding applications.
NEOS 12F is designed to be mounted within 100mm of the product. It is the most powerful short range static eliminator available.
NEOS 12L is an antistatic eliminator for ranges up to 600 mm. For larger ranges see NEOS 20 and NEOS 30 static eliminators.
NEOS 20 is an antistatic eliminator for longer distances. Distances between 150mm and 800mm.
NEOS 30 is an antistic eliminator for long ranges. Distances between 200mm and 1500mm.
