Pens FORMAMIDE Jumbo 45ml

Formamide-based Jumbo pencils meet ASTM standards. They are delivered in a box of 6 pencils of 45mL each or individually.
The markers (with reservoir and valve) can be transported without fear, they make it possible to supply the pad with new ink each time it is used.

CategoryMeasuring Surface Tension

Product TypePens

Specifications

  • Available: from 38 to 58 dynes (consecutive)
  • Unit of measure: dyne/cm (mN/m)
  • ASTM standard measurements: 1 cm wide and 7 cm long
  • To avoid inaccuracies: storage temperature between 10 ° and 25 ° C.
  • Correction depending on excess temperature: approximately -1 dyne / + 10 ° C
  • Take care not to pollute the tip of the pencil (spare tips available: contact us)
  • Avoid contact with eyes, skin (toxic, dangerous).

Technical Datasheet

Exchangeable Plugs

Spare plugs can be ordered independently of other products, by minimum of 6 pieces, in order to change worn or lost parts. So you don’t have to recommend full pencils. Do not hesitate to contact us.

CategoryMeasuring Surface Tension

Product TypePens

Empty Rechargeable Pens 45ml

Empty pencils can hold up to 45 mL of ink.
The markers (with tank and valve) can be filled and transported without fear. You can use different ECO ink containers to fill these pencils (bottles, bottles, etc.)

CategoryMeasuring Surface Tension

Product TypePens

Technical Datasheet

Empty pens and ink bottles ECO 100ml

You fill the pencils yourself, at your convenience. The ECO ink present in the bottles is an advanced counterpart of formamide, very precise (different from a simple mixture of water and alcohol).
The markers (with tank and valve) can be filled and transported without fear.

CategoryMeasuring Surface Tension

Product TypePens

Specifications

  • Dynes available: 28 to 58 dynes (even numbers) and 59 to 71 dynes (odd)
  • Unit of measure: dyne/cm (mN/ m)
  • To avoid inaccuracies: storage temperature between 10 ° and 25 ° C.
  • Correction depending on excess temperature: approximately -1 dyne / + 10 ° C
  • Avoid contact with eyes, skin (irritant).
  • To determine the levels you need: Call us.

Technical Datasheet

Pens ECO Jumbo 45ml

ECO Jumbo pencils contain 45 mL of ECO ink.
ECO ink is an advanced counterpart of formamide, very precise (different from a simple mixture of water and alcohol).
The markers (with reservoir and valve) can be transported without fear, they make it possible to supply the pad with new ink each time it is used.

CategoryMeasuring Surface Tension

Product TypePens

Specifications

  • Dynes available: 28 to 58 dynes (even numbers) and 59 to 71 dynes (odd)
  • Unit of measure: dyne / cm (mN / m)
  • To avoid inaccuracies: storage temperature between 10 ° and 25 ° C.
  • Correction depending on excess temperature: approximately -1 dyne / + 10 ° C
  • Avoid contact with eyes, skin (irritant).
  • To determine the levels you need: Call us.

Technical Datasheet

L40 Liquid Conductivity Meter

The L40 liquid conductivity meter is an essential diagnostic instrument for electrostatic hazard control.

The motion of low conductivity liquids, such as fuels and solvents, can result in the generation of hazardous levels of static electricity. Stirring, pouring and, in particular, flow through metal or plastic pipes are all examples of industrial operations which can produce ignitions, fires and explosions.

CategoryAntistatic Solutions

Product TypeMeasurement of Static

Specifications

  • The L40 measures the electrical conductivity below 1 pS.m-1. It is an essential cability in investigate ignition hazrd.
  • Direct read-out of conductivity on a back-lit digital display.
  • Auto-ranging covers 0-1 pS.m-1 to 1.0 x 108 pS.m-1.
  • Microprocessor controlled auto-zeroing before each measurement.
  • External stainless steel metering cell. Metering dose volume 36 ml.

Technical Datasheet

EX715 Static Meter

The EX715 Static Meter has been developed to investigate industrial static electricity problems and has been certified for use in hazardous areas.

The EX715 meter can show where and how the static electricity is generated, its magnitude and its polarity. This gives the engineer a scientific basis for analysis.

  • The EX715 is certified for use in hazardous area Zones 1 and 2.See datasheet for details of ATEX and IECEx certification.
  • The EX715 measures static electricity on the surface of a material, at a distance of 100mm.
  • The EX715 monitors the effectiveness of the action taken to solve the problem. If the solution involves static control equipment, the EX715 shows its most effective position.
  • Hold facility to freeze the reading on the LCD.

CategoryAntistatic Solutions

Product TypeMeasurement of Static

Specifications

  • The L40 measures the electrical conductivity below 1 pS.m-1. It is an essential cability in investigate ignition hazrd.
  • Direct read-out of conductivity on a back-lit digital display.
  • Auto-ranging covers 0-1 pS.m-1 to 1.0 x 108 pS.m-1.
  • Microprocessor controlled auto-zeroing before each measurement.
  • External stainless steel metering cell. Metering dose volume 36 ml.

Technical Datasheet

740 Surface Resistivity Meter

The 740 Surface Resistance Checker is a pocket-sized instrument providing fast and repeatable measurements of conductive, static dissipative and insulative surfaces.

The 740 measures both surface resistivity and resistance to ground.  

  • It uses the ASTM Standard D257 method of parallel bar sensing.
  • For surface resistance, place the 740 on the flat surface to be measured, press the button and hold. The LED that illuminates is the decade measured in ohms/square.
  • For resistance to ground measurement, insert the ground, cord connector into the metal socket on the right hand side of the body. Then connect the crocodile clip to earth and place the 740 on the surface to be tested. Press the button the reading is resistance to ground in Ohms.
  • Automatic ranging.
  • Supplied with carrying case, battery and earth lead.
  • CE Certified.740 measures both surface resistivity and resistance to ground.

CategoryAntistatic Solutions

Product TypeMeasurement of Static

Technical Datasheet

720 Static Bar Checker

The pocket sized 720 is a quick and accurate method of checking that AC Static Eliminator Bars are working.

The 720 works by measuring the electric charge induced onto the internal sensor by the emitter pins of the static eliminator. An integrated circuit drives the LED display, according to the power of the signal.

  • The operator should press and hold the white button, and approach the static eliminator bar. If the bar is working, the LED display will be activated by the voltage of the signal. Take the reading at the same distance each time, the 720 may touch the emitter pins if this is easier.
  • If there is a deterioration in performance it may signal that the bar needs cleaning or that there is a fault in the transformer. If there is no signal there is either a short in the system or the transformer is defective. Also check the battery in the 720.

CategoryAntistatic Solutions

Product TypeMeasurement of Static

Technical Datasheet

715 Static Meter

The 715 Static Meter has been developed to enable industrial engineers to investigate static electricity problems.

Its accuracy, stability and ease of use make it the leading instrument in its class.

  • The 715 measures static electricity on the surface of a material, at a distance of 100mm.
  • The meter can show where and how the static is generated, its magnitude and its polarity.
  • The 715 monitors the effectiveness of the action taken to solve the problem. If the solution involves static control equipment, the 715 shows its most effective position.
  • The 715 allows the engineer to set standards to avoid future problems. These can range from an acceptable level of charge in materials, to charge levels in products being produced by the process.
  • The 715 has two ranges selected automatically. The high range measures up to 200kV with a resolution of 100V. The low range measures up to 20kV with a resolution of 10V.
  • There is a hold facility to freeze the reading on the display.

CategoryAntistatic Solutions

Product TypeMeasurement of Static

Technical Datasheet