Staticontrol AS11VG

The Staticontrol AS11VG is an internal emulsifier – antistatic additive approved for the treatment of polyolefin packaging for foodstuffs.

Normal dosages of use: PP injection 0.5 to 2%.
The Staticontrol AS11VG can also be used for plasticized PVC (maximum 0.8% if transparent).
The utilization rates recommended above, allow to obtain RS from 1011 ohms to 10 10 ohms.
The higher the dosage, the greater the side effects.

Precautions: do not preheat above 45 ° C (risk of caking).
Implementation: use with doser and / or mixer.

CategoryAntistatic Treatments

Product TypeAntistatic Additives

Application

The Staticontrol AS11VG provides an immediate antistatic effect a few minutes to a few hours (depending on the dosage) after extrusion or injection (the Corona or flame treatment accelerates migration), this for a period of up to a few years, depending on the dosage and in the absence of friction.
Certain mineral fillers can absorb the antistatic product and reduce its migration, and therefore its effectiveness.

Technical Datasheet

Staticontrol AS11N

The Staticontrol AS11N is an internal emulsifier – antistatic additive approved for the treatment of polyolefin packaging for foodstuffs.

Normal dosages of use: PP injection 0.5 to 2%.
The Staticontrol AS11N can also be used for plasticized PVC (maximum 0.8% if transparent).
The utilization rates recommended above, allow to obtain RS from 1011 ohms to 10 10 ohms.
The higher the dosage, the greater the side effects.

Precautions: do not preheat above 45 ° C (risk of caking).
Implementation: use with doser and / or mixer.

CategoryAntistatic Treatments

Product TypeAntistatic Additives

Application

The Staticontrol AS11N provides an immediate antistatic effect a few minutes to a few hours (depending on the dosage) after extrusion or injection (the Corona or flame treatment accelerates migration), this for a period of up to a few years, depending on the dosage and in the absence of friction.
Certain mineral fillers can absorb the antistatic product and reduce its migration, and therefore its effectiveness.

Technical Datasheet

Quick Test

  1. 38 dynes Quick test pencils, quick drying (used to distinguish the treated side from the untreated side of a film)
  2. Pencils 38, 40, 42, 44 dynes ECO (precise measurement)

Minimum order 10 pencils, possible mixing for Quick test 38 dynes and 40, 42, 44 dynes ECO

Quick test hair pencils
Quick tests are pencils containing quick-drying ink at 38 dynes, of lower precision than ECO ink.

Technical Datasheet

Video

SHOP ONLINE

CategoryMeasuring Surface Tension

Product TypeQuick Test

Box ECO 16x50ml

The suitcases contain 16 ECO 50mL bottles.
ECO ink is an advanced counterpart of formamide, very precise (different from a simple mixture of water and alcohol).
You can use these bottles by applying the ink using empty Jumbo pencils or cotton testers.

CategoryMeasuring Surface Tension

Product TypeBoxes

Specifications

  • Dynes available: 28 to 58 dynes (even numbers) and 59 to 71 dynes (odd)
  • Unit of measure: dyne/cm (mN/m)
  • To avoid inaccuracies: storage temperature between 10 ° and 25 ° C.
  • Correction depending on excess temperature: approximately -1 dyne / + 10 ° C
  • Avoid contact with eyes, skin (irritant).
  • To determine the levels you need: Call us.

Technical Datasheet

Box ECO 8x50ml

The box contain 8 ECO bottles of 50mL.
ECO ink is an advanced counterpart of formamide, very precise (different from a simple mixture of water and alcohol).
You can use these bottles by applying the ink using empty Jumbo pencils or cotton testers.

CategoryMeasuring Surface Tension

Product TypeBoxes

Specifications

  • Dynes available: 28 to 58 dynes (even numbers) and 59 to 71 dynes (odd)
  • Unit of measure: dyne/cm (mN/m)
  • To avoid inaccuracies: storage temperature between 10 ° and 25 ° C.
  • Correction depending on excess temperature: approximately -1 dyne / + 10 ° C
  • Avoid contact with eyes, skin (irritant).
  • To determine the levels you need: Call us.

Technical Datasheet

Testing Cottons

Swabs allow you to apply ECO ink from Boussey Control Europe vials or bottles. This can in particular allow you to test on smaller products. ECO ink is an advanced counterpart of formamide, very precise (different from a simple mixture of water and alcohol).

CategoryMeasuring Surface Tension

Product TypeBottles

Bottles ECO 1L (blue ink)

ECO bottles contain 1000ml of blue ECO ink.
ECO ink is an evolved counter-type of formamide, very precise (different from a simple water-alcohol mixture).
You can use these bottles by applying the ink using empty Jumbo pencils or cotton testers.

CategoryMeasuring Surface Tension

Product TypeBottles

Specifications

  • Dynes available: 28 to 58 dynes (even numbers) and 59 to 71 dynes (odd)
  • Unit of measure: dyne/cm (mN/m)
  • To avoid inaccuracies: storage temperature between 10 ° and 25 ° C.
  • Correction depending on excess temperature: approximately -1 dyne / + 10 ° C
  • Avoid contact with eyes, skin (irritant).
  • To determine the levels you need: Call us.

Technical Datasheet

Bottles ECO 1L – 2,5L (green ink)

ECO bottles contain 1000ml or 2500ml of ECO ink.
ECO ink is an advanced counterpart of formamide, very precise (different from a simple mixture of water and alcohol).
You can use these bottles by applying the ink using empty Jumbo pencils or cotton testers.

CategoryMeasuring Surface Tension

Product TypeBottles

Specifications

  • Dynes available: 28 to 58 dynes (even numbers) and 59 to 71 dynes (odd)
  • Unit of measure: dyne / cm (mN / m)
  • To avoid inaccuracies: storage temperature between 10 ° and 25 ° C.
  • Correction according to excess temperature: approximately -1 dyne / + 10 ° C
  • Avoid contact with eyes, skin (irritant).
  • To determine the levels you need: Call us.

Technical Datasheet

Bottles ECO 8x50ml

These ECO bottles contain 50 ml of ECO ink.
ECO ink is an advanced counterpart of formamide, very precise (different from a simple mixture of water and alcohol).
You can use these bottles by applying the ink using empty Jumbo pencils or cotton testers.

CategoryMeasuring Surface Tension

Product TypeBottles

Specifications

  • Dynes available: 28 to 58 dynes (even numbers) and 59 to 71 dynes (odd)
  • Unit of measure: dyne/cm (mN/m)
  • To avoid inaccuracies: storage temperature between 10 ° and 25 ° C.
  • Correction depending on excess temperature: approximately -1 dyne / + 10 ° C
  • Avoid contact with eyes, skin (irritant).
  • To determine the levels you need: Call us.

Technical Datasheet

Bottles ECO 100ml

These ECO bottles contain 100 ml of ECO ink.
ECO ink is an advanced counterpart of formamide, very precise (different from a simple mixture of water and alcohol).
You can use these bottles by applying the ink using empty Jumbo pencils or cotton testers.

CategoryMeasuring Surface Tension

Product TypeBottles

Specifications

  • Dynes available: 28 to 58 dynes (even numbers) and 59 to 71 dynes (odd)
  • Unit of measure: dyne/cm (mN/m)
  • To avoid inaccuracies: storage temperature between 10 ° and 25 ° C.
  • Correction depending on excess temperature: approximately -1 dyne / + 10 ° C
  • Avoid contact with eyes, skin (irritant).
  • To determine the levels you need: Call us.

Technical Datasheet