Generators

The generators provide the power necessary for the surface treatment station.

CategorySurface Treatments

Product TypeCORONA Treatment

Specifications

Generators between 0.5kW and 100kW. It all depends on the generator model.
Do not hesitate to contact us for more information.

Operation

The front panel includes a digital digital screen, control of reactive power (measurement of the corresponding efficiency), or frequency, as desired. But also, power control, frequency of control, alarm / fault / status indicators and a locked security door which includes electrical isolators.

Treatment Station

An electrode, connected to a generator at high frequency and high alternating voltage, emits an electric discharge in the form of an effluvium.

What physically and chemically modifies the material to be treated (adhesion of inks, adhesives)

CategorySurface Treatments

Product TypeCORONA Treatment

Specifications

Depending on your application, the product to be treated, your width and your speed of treatment, we offer the right system.

  • 220/5000Stainless steel segmented electrodes => treatment interruptions (reserves).
  • Multi-blade electrodes => regular high-quality crosswise processing
  • Ceramic electrodes => treatment of any support (conductive or not).

Operation

Our custom Corona stations.

  • From a few centimeters to several meters.
  • All types of dielectric cylinders (silicone cover or silicone sleeves, rectified or not, ceramic).
  • All types of electrodes (adjustable multi-blades, U, aluminum and stainless steel segments, ceramic electrode).

Staticontrol AS90E40

The Staticontrol AS90E40 is an antistatic surface agent. This agent is approved for the antistatic treatment of packaging for foodstuffs (maximum dose for use of AS-90 E40: 100 mg / dm2).
The Staticontrol AS90E40 is more than 99% biodegradable and is also a good detergent.

Type: anionic, Appearance at 20 ° C: pale yellow liquid, Solubilities: water (or water / butanol mixture).

CategoryAntistatic Treatments

Product TypeAntistatic Liquids

Application

The thermal stability of the active ingredient Staticontrol AS90E40 is excellent up to 240 ° C.
Apply the Staticontrol AS90E40 to the surface of the material to be treated by spraying, soaking or padding (diluted in 1 to 10 volumes of water).
In case of annoying fatty traces (depending on the treated support) dilute the Staticontrol AS90E40 with 1 or 2 volumes of solvent (water or water + butanol depending on the desired drying time). For PMMA, PC only use water.
We recommend carrying out tests in the event of printing (may also increase the slippery effect).

Technical Datasheet

Staticontrol AS90E10

The Staticontrol AS90E10 is an antistatic surface agent. This agent is approved for the antistatic treatment of food packaging (maximum dose for use of the Staticontrol AS90E10: 100 mg / dm2).
The Staticontrol AS90E10 is more than 99% biodegradable and is also a slip agent.

Type: anionic, appearance at 20 ° C: pale yellow liquid, Solubilities: water (or water / butanol mixture).

CategoryAntistatic Treatments

Product TypeAntistatic Liquids

Application

The thermal stability of the active ingredient Staticontrol AS90E10 is excellent up to 240 ° C.
Apply the Staticontrol AS90E10 to the surface of the material to be treated by spraying, soaking or padding.
In case of annoying fatty traces (depending on the treated support) dilute the Staticontrol AS90E10 with 1 or 2 volumes of solvent (water or water + butanol depending on the desired drying time). For PMMA, PC only use water.
We recommend carrying out tests in the event of printing (may also increase the slippery effect).

Technical Datasheet

Staticontrol AS77E40

The Staticontrol AS77E40 is an antistatic cationic surface agent. Its germicidal power prohibits its use for the treatment of food packaging.

Type: cationic, Appearance at 20 ° C: clear liquid, Color: Gardner 5
Solubilities: alcohol, water.
The Staticontrol AS77E40 is an antistatic (and bacteriological) cationic surface agent, generally compatible with anionic surface agents.

CategoryAntistatic Treatments

Product TypeAntistatic Liquids

Application

The thermal stability of the Staticontrol AS77E40 is good up to 80/100 °.
Dilute 1 to 4 volumes of solvent (water, alcohol, water + alcohol, depending on the desired drying time).
Apply the solution to the surface of the material to be treated by spraying, soaking or padding.

Technical Datasheet

Staticontrol AS77E10

The Staticontrol AS77E10 is a cationic surface antistatic agent. Its germicidal power prohibits its use for the treatment of food packaging.

Type: cationic, Appearance at 20 ° C: clear liquid, Color: Gardner 5
Solubilities: alcohol, water.
The Staticontrol AS77E10 is an antistatic (and bacteriological) cationic surface agent, generally compatible with anionic surface agents.

CategoryAntistatic Treatments

Product TypeAntistatic Liquids

Application

The thermal stability of the Staticontrol AS77E10 is good up to 80/100 °.
Dilute 1 to 4 volumes of solvent (water, alcohol, water + alcohol, depending on the desired drying time).
Apply the solution to the surface of the material to be treated by spraying, soaking or padding.

Technical Datasheet

Staticontrol AS66N

The Staticontrol AS66N is an internal antistatic agent. This agent is approved for the antistatic treatment of packaging for foodstuffs (maximum use dose of Staticontrol AS66N: 0.15% EEC regulation / 0.1% FDA regulation).

Type: nonionic, Appearance at 20 ° C: liquid, Color: yellow (Gardner 2)
Solubilities: alcohol, toluene, n-hexane, carbon tetrachloride.

The Staticontrol AS66N is sold in 180 kg drums.

CategoryAntistatic Treatments

Product TypeAntistatic Liquids

Application

The Staticontrol AS66N antistatic liquid is used in the antistatic treatment for thermoplastic polymers. The thermal stability of the active ingredient in AS-66 N is excellent.

Technical Datasheet

Staticontrol MSG190G

The Staticontrol MSG190G is an emulsifying additive – internal antistatic approved for the treatment of polyolefin packaging for foodstuffs (all components are vegetable-based – GMO-free – Kosher and Halal).

Normal dosages of use: PP injection 0.3 to 1.5%, the Staticontrol MSG190G can also be used for plasticized PVC (maximum 0.6% if transparent).
The usage rates recommended above allow RS # 1011 ohms to 1010 ohms to be obtained. The higher the dosage, the greater the side effects.

Precautions: do not preheat above 45 ° C (risk of caking).
Implementation: use with doser and / or mixer.

CategoryAntistatic Treatments

Product TypeAntistatic Additives

Application

The Staticontrol MSG190G provides an immediate antistatic effect for a few minutes to a few hours (depending on the dosage) after extrusion or injection (the Corona or flame treatment accelerates migration), this for a period of up to a few months, depending on the dosage and absence of friction.
The normal rate of use varies from 0.3% to 1.5% maximum for PP injection (in high grades).

Technical Datasheet

Staticontrol MSG100G

The Staticontrol MSG100G is an emulsifying additive – internal antistatic approved for the treatment of polyolefin packaging (all components are vegetable-based – GMO-free – Kosher and Halal).

Normal dosages of use: PP injection 0.3 to 1.5%, the Staticontrol MSG100G can also be used for plasticized PVC (maximum 0.6% if transparent).
The rates of use recommended above, make it possible to obtain RS from 1011 ohms to 1010 ohms. The higher the dosage, the greater the side effects.

Precautions: do not preheat above 45 ° C (risk of caking).
Implementation: use with doser and / or mixer.

CategoryAntistatic Treatments

Product TypeAntistatic Additives

Application

The Staticontrol MSG100G provides an immediate antistatic effect for a few minutes to a few hours (depending on the dosage) after extrusion or injection (the Corona or flame treatment accelerates migration), this can last for up to a few months, depending on the dosage and absence of friction.
The normal rate of use varies from 0.3% to 1.5% maximum for PP injection (in high grades).
The normal utilization rate is 1 to 2% (RS 1010/11 ohms).
The presence of a slip agent promotes migration, a dosage of 1% is then sufficient (in particular for very thick layers).

Technical Datasheet

Staticontrol AS15N

The Staticontrol AS15N is an internal emulsifier – antistatic additive approved for the treatment of food packaging. The Staticontrol AS15N is mainly intended for LDPE (mixture, LDPE, HDPE, PP).

Normal dosages for using LDPE films: 1 to 2%.
A rate of use at 2% of AS – 15 N favors antistatic treatment with an RS of 1010/11 ohms, a high speed (and longevity) of migration.
The side effects are of course more important. The Staticontrol AS15N is developed from a new low temperature manufacturing process avoiding thermal degradation of its components.

Precautions: do not preheat above 45 ° C (danger of caking).
Implementation: use with doser and / or mixer.

CategoryAntistatic Treatments

Product TypeAntistatic Additives

Application

The Staticontrol AS15N provides an immediate effect a few minutes to a few hours after extrusion (the Corona treatment accelerates migration), this lasting up to a few years depending on the dosage and in the absence of friction.
The normal utilization rate is 1 to 2% (RS 1010/11 ohms).
The presence of a slip agent promotes migration, a dosage of 1% is then sufficient (in particular for very thick layers).

Technical Datasheet